OutdoorChief.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

A tonneau cover is an essential purchase for your truck. There is no better way of keeping your tools and any other items, safe, dry and secure.

However, there are a ton of options available to the average truck owner. How do you know which is the best tonneau cover to buy?

Well we’re here to help. We’ve taken 5 top rated covers and provided an in depth analysis on the pros and cons of each.

For our findings at a glance, just head to the table below. For a full on buyer’s guide plus a comprehensive review of each of our selected picks, keep on reading.


Best Tonneau Cover – Top 5

TONNEAU COVERNAMEDETAILSOUR RATING
TOP PICK
ALL TRUCKS:
Lund 96893
Genesis Elite
Tonneau Cover
Roll-Up
Reduced Drag
Fabric
TOP PICK
VEHICLE SPECIFIC:
Tyger Auto
TG-BC3C1007
Tonneau Bed Cover
Tri-Fold
Patented clamps
Low Profile
Tonno Pro 42-200
Tonno, Black
Truck Tonneau
Cover
Tri-fold
6063 Aluminum
Water Tite
Rubber Seals
Premium TCD371011
Tonneau Bed
Cover
Tri-Fold
10 year warranty!
TruXedo 271801
TruXport
Tonneau Cover
Roll-Up
Easy Clamp-On
5 Year Warranty

Best Tonneau Cover Buyer’s Guide

Tonneau Cover Basics

Although this may seem obvious, we’ll start at the very beginning and explain what a tonneau cover is.

Essentially, the cover is a very useful auto accessory designed to provide a fitting, water tight covering over the cargo bed or truck bed of a pick-up truck.

It is designed to keep any belongings stored within the truck bed, dry and secure.

Benefits of using a tonneau cover

The benefits of using a tonneau cover are self-explanatory for the most part.

For instance, if your cargo is hauled uncovered, it can accumulate dust, become soggy, be knocked around, or even fall off the truck along the way; and if its raining, the cargo will become wet or be damaged by snow during snow-falls.

Also, people can see what cargo is being hauled, and petty criminals can even offload some of the cargo if the car is at a standstill. Stop for just 5 minutes while you enter the hardware store and you could be at risk.

Even a traffic jam could be the amount of time an opportunist needs to make off with an item when exposed in the back of your truck.

Other issues will occur too. If your uncovered cargo is left lying around the truck-bed in sunny conditions, it can fade and discolors. Electrical tools may heat up causing internal components to malfunction when next in use.

In short, the tonneau cover is designed to not only provide cover, but also protect the cargo from becoming dirty, falling off, or being knocked around a moving vehicle; as well as shield both the cargo and truck bed from prying eyes and harmful ultraviolet solar rays.

An added bonus is purely aesthetic; some tonneau covers can be painted to match the color scheme of the vehicle, and this improves the overall truck appearance.

The different types of Tonneau Cover

As mentioned, there are different tonneau covers, and they can be broadly categorized into 4 distinct groups based on their mechanism of operation. These groups are the roll-up covers, retractable covers, folding covers, and hinged tonneau covers.

The Roll-up Cover

Roll-up covers are primarily secured behind the cab at the front-most end of the truck-bed, and they are then rolled across the truck bed to cover it up-to the tailgate.

To use it, one needs to first open the tail gate and then shove the cargo underneath the roll-up cover, or simply roll up the cover using its uncovering and covering system, which usually uses Velcro straps, snaps, or a tongue-and-groove rails.

There are two main types of roll-up covers, soft and hard roll-up covers. The soft roll-up cover is made from a flexible, rip-resistant fabric material; and its low profile design allows it to sit down flush on the truck-bed rails hence making the vehicle appear sleek.

Some soft roll-up covers features braces or a rail system underneath it which helps them to withstand massive snow weights without deforming.

On the other hand, hard roll-up covers are made using aluminum slats instead of fabrics, and this allows them to withstand incredible snow weights as well as makes them heft-resistant. Hard roll-up covers are more expensive than soft roll-up covers.

The Retractable Tonneau Cover

A retractable tonneau cover is designed to retract into, or be pulled out of, its canister housings. The canister is fitted behind the cab at the front-most end of the truck-bed, just below the bed-rails.

This cover is made from lots of vinyl-covered or powder-coated aluminum slats that are designed to retract towards the canister when opening up the truck bed.

There are 2 main types of retractable covers; manual and power retractable cover. The manual cover requires one to use their hands to retract the slats, while in the power cover, a remote control is used to manage the retraction process.

Folding Tonneau Covers

Folding tonneau covers are made from 3 (or sometimes 4) foldable panels. These panels need to be folded towards the cab in order for truck bed to be opened. It comes into 2 main types; soft and hard folding covers.

The soft folding cover is a lightweight product made of foldable aluminum-frames that are covered with vinyl. On the other hand, the hard folding covers are made of either fiberglass or solid vinyl-covered aluminum panels.

Hinged Tonneau Cover

The hinged tonneau cover is a one-piece bed cover that is hinged on gas struts located at the front-most end of the truck-bed. The owner just needs to lift the cover up to open the truck bed, and then pull it down to close the bed.

What to consider when buying a tonneau cover

As we have covered above, there are different designs, styles and types of tonneau cover; and this leaves the car-owner spoilt for choice with regard to the right tonneau cover to choose.

Even so, there are 5 main criteria that the vehicle owner must consider when buying a tonneau cover, and they are: height of pick-up truck, size of truck bed, quality, type of cargo to be hauled, and cost.

The height of truck, and size of its truck bed determine both the size and type of tonneau cover that one needs, while type of cargo be hauled primarily determines the type of cover.

The aspect of quality determines the durability of the cover, which also influences the cost.

With each of our selected covers when you reach the product page in order to purchase, you will be asked to give details of the model of vehicle you wish to fit the tonneau on to.

This is important, as the dimensions of the cover need to mach that of your truck bed.


Best Tonneau Cover – The Reviews

Even though there are many covers available today, they can all be rated based on their design, quality, durability, and cost-performance attributes.

These criteria have been used to select 5 of the best tonneau covers for this article. For the low down on each of our picks, it is time for the reviews.

1. TOP PICK, MODEL SPECIFIC: Tyger Auto TG-BC3C1007 Truck Tonneau Cover

The Tyger Auto TG-BC31007 is a durable, high-quality, and easy-to-install vinyl-covered soft folding tonneau cover that features three foldable panels.

Furthermore, these panels are nice and easy to operate through an incorporated patented latch system. (The 3 foldable panels give it the designation, tri-fold.)

The aluminum frame of each panel features upward-arched support bows which ensure that the cover is not only held taut, but that water dropping on the cover drains quickly from the vehicle.

This economical cargo-bed cover is designed to secure and protect cargo, as well as shield it from sunlight, rainfall, and prying eyes.

This model is designed and manufactured by Tyger Auto, a leading maker of high-quality and durable tonneau covers.

The Tyger Auto TG-BC3C1007 is a well-designed lightweight product that weighs only 33 pounds, hence it does not add any significant weight to the pick-up truck. This is great for fuel economy.

The fully-assembled tonneau cover is 71inches long, 30.4inches wide, and its aluminum frame is only 4.3inches thick.

This tri-fold cover is installed on top of the bed rails of a truck, and this also ensures that it covers the stake pockets, hence the car-owner cannot install racks on top of this soft tri-fold cover.

This tonneau cover belongs to the latest brands of truck-bed covers that are described as model-specific, that is, they are built to fit snugly into specific vehicle models.

The Tyger Auto TG-BC3C1007 is designed to fit into the following 4 pick-up models; 2014-2017 GMC Sierra 1500, 2015-2017 GMC Sierra 2500HD, 2014-2017 Chevrolet Silverado 1500, and 2015-2017 Chevrolet Silverado 3500HD.

It is well suited to fit to the standard 6.5-feet (78 inches) long truck bed of these models, especially if they lack a utility track.

This tonneau cover model is shipped as a package, which contains a fully-assembled bed cover, storage bag, magnetic LED light, mounting hardware kit, side rail pair (left and right), installation instructions manual, warranty card, and weather seals.

Its 4-step install process is well explained in the manual, and the LED light facilitates installation in dark or dimly-lit environments. It also comes with clamps which are used to secure the side rails to the truck-bed.

The tri-fold cover is fastened onto the truck bed using an easy-to-operate latch system that has been purposefully-designed to accommodate the upward-arched support bows of 3 aluminum-made frames.

When opening the cover, the tail gate needs to be opened first, and then the the first panel is folded onto the second panel, and these panels are then folded to the third panel.

Afterwards, the entire unit can be manually lifted off the vehicle by one person. For this reason, it is recommended that the Tyger system be installed in truck of standard height, as it is can be challenging to lift off the tri-fold from a high truck, or one with a raised bed.

Because the tri-fold cover can be completely dismounted, the truck-owner has complete access to the entire truck-bed.

However, this also poses a challenge as the truck-owner also needs to mount the entire system back onto the truck every time cargo is hauled.

Still, the ability to fold only one or two panels allows for tall cargo to be hauled uncovered, while short compact cargo can be hauled inside the covered compartment.

The process of installing the tonneau cover to the truck normally takes about 5-10 minutes. The dismounting of the tri-fold cover takes less time, hence it can be used efficiently even by a user pressed for time.

Also, the magnetic LED light can be fitted to the back-side of the cabin frame where it can be lit to provide light for mounting or dismounting the cover at night or late in the evening.

The Tyger Auto TG-BC3C1007 improves aerodynamics by minimizing drag as wind flows across the vehicle smoothly.

Generally, when the truck-bed is exposed and the tailgate closed, air form the flowing wind is trapped in the truck bed compartment, and this creates an air bubble that is trapped in this compartment.

This trapped bubble creates ebbs in the flowing wind, which try to force the truck-bed to move along with the wind and this creates a small degree of acceleration in a direction opposite the cab movement.

This phenomenon is called a drag as the can is forced to drag the truck-bed which is attempting to accelerate towards an opposite direction.

This drag causes the vehicle to burn more fuel. Fortunately, this tonneau cover eliminates the bubble trap hence the vehicle experiences almost zero drag and this definitely improves the fuel mileage.

Apart from improved fuel mileage, this vinyl-covered tri-fold also improves the aesthetics of the truck by giving it a glossy and sleek appearance. Its weather-tight seals protect the cargo from dust, dirt, and moisture.

The Tyger Auto TG-BC3C1007 also benefits from a limited lifetime warranty.

Pros of the Tyger Auto TG-BC3C1007 Tonneau Cover
  • Fully-assembled tri-fold cover.
  • Made of durable aluminum frames.
  • Frames holds fabric tautly and prevents them from flapping during travel.
  • Easy to operate latch system.
  • 4-step east-to-follow install process.
  • Lightweight.
  • Low profile design.
  • Supports hauling of tall cargoes.
  • Textured vinyl-covered finish.
  • Limited lifetime warranty.
The Cons
  • Model-specific cover designed to fits well in only 4 car brands.
  • Needs to be fully dismounted and then mounted during cargo haulage.
  • Racks cannot be installed on top of tri-fold cover.

Bottom-line

The Tyger Auto TG-BC3C1007 is a durable, high-quality, and easy-to-setup vinyl-covered soft folding tonneau cover that features three foldable panels that are operated by an easy-to-use latch system.

Its panels feature high-grade aluminum frames that have upward-arched support bows that ensure that the fabric is held taut, and can quickly drain water.

The intuitive design, good construction quality, durability, and superb cost-performance ratio of Tyger Auto TG-BC3C1007 makes it (in our opinion) the best tonneau cover currently available on the market, (assuming you have the correct vehicle).


2. Tonno-Pro 42-200 Tonneau Cover

This is a durable, high-quality, and easy-to-install soft folding tonneau cover that features three foldable panels (hence the designation tri-fold) operated by an easy-to-use latch system.

Its vinyl polyester cover is of premium-grade quality that can withstand extreme weather conditions.

Its panels feature high-grade aluminum frames that have upward-arched support bows whose function is to ensure that the fabric is held taut, and can quickly drain water.

Its tough nylon connectors ensure that it folds compactly, while the patented Water-Tite rubber seals keep moisture out of the covered cargo compartment.

This affordable tri-fold cover is designed to secure and protect cargo, as well as shield it from sunlight, rainfall, and prying eyes.

This model is designed and manufactured by Tonno Pro, a China-based maker of tonneau covers.

It comes with four free gifts; Sureseal Tailgate Seal, Pro-Clean Vinyl Cleaner, Tonno-Torch truck-bed light and a pair of work gloves.

The Tonno-Pro 42-200 is a well-designed lightweight product that weighs only 32 pounds, hence it does not add any significant weight to the pick-up truck. The fully-assembled tonneau cover is 73inches long, 31inches wide, and its aluminum frame is 5inches thick.

Just like the Tyger Auto TG-BC3C1007, the Tonno-Pro 42-200 belongs to the latest brands of truck-bed covers described as model-specific.

The Tonno-Pro 42-200 is designed to fit well into the following pick-up models; 02-13 Dodge-Ram SB and 06-08 Ram-Mega Cab.

It is well suited to fit to the standard 6.5-feet long truck bed of these models. Its 6063 powder-coated black aluminum alloy frame is secured to the truck-bed rail using impact-resistant clamps.

The Tonno-Pro 42-200 is shipped as a package that contains a fully-assembled bed cover, storage bag, LED light with Velcro fastener, mounting hardware kit, instruction manual, weather seals, and a pair of side rails.

The LED light facilitates installation in dark or dimly-lit environments. It also comes with clamps which are used to secure the side rails to the truck-bed.

It features a sealing flap made from high-quality rubber hence ensuring that it withstands the extreme outdoor conditions that the tri-fold is exposed to.

Likewise, the vinyl cover can withstand the heat, cold, ultra-violet light is is exposed to, alongside salt and moisture.

The soft and flexible rubber gasket that attaches the tri-fold to the truck-bed rails creates an effective leak-proof seal that ensures that the covered cargo is not affected by moisture.

The vinyl cover is stitched to along the aluminum frames, with TonnoPro ensuring that there are 4 stitches per inch for added strength and durability.

The stitching is done using avant-grade coated threads, with the coats expanding to create water-proof seals that fill the stitch holes.

The tonneau cover is fastened onto the truck bed using an easy-to-operate latch system that has been purposefully-designed to accommodate the upward-arched support bows.

Just like the Tyger Auto TG-BC3C1007 reviewed above, the Tonno-Pro 42-200 can only be opened once the tailgate has been flung open. The panels can then be folded on top of each other towards the cab, and if necessary entirely dismounted from the truck-bed so that the user has complete access to the truck-bed.

For this reason, it is recommended that this tri-fold be installed in truck of standard height, as it is can be challenging to lift off the tri-fold from a high truck, or one with a raised bed.

Another downside of this is that the truck-owner needs to mount the entire tri-fold cover back onto the truck every time cargo is hauled.

Still, the ability to fold only one or two panels allows for tall cargo to be hauled uncovered, while short compact cargo can be hauled inside the covered compartment.

The process of installing this tri-fold to the truck normally takes about 15 minutes. The dismounting of the tri-fold cover takes less time, hence it can be used efficiently even by a user pressed for time.

Just like the Tyger Auto,  the Tonno-Pro 42-200 cover improves aerodynamics by minimizing drag and this ultimately improves fuel mileage.

The vinyl-covered tri-fold also improves the aesthetics of the truck by giving it a glossy and sleek appearance. Its weather-tight seals protect the cargo from dust, dirt, and moisture.

The Tonno-Pro 42-200 also benefits from a limited lifetime warranty.

Pros of the Tonno-Pro 42-200 Tonneau Cover
  • Fully-assembled tri-fold cover.
  • Made of durable grade-6063 aluminum alloy frames.
  • Frames prevents fabric from flapping during travel.
  • Low profile design.
  • Easy to operate latch system.
  • Lightweight.
  • Supports hauling of tall cargoes.
  • Textured vinyl-covered finish.
  • Limited lifetime warranty.
The Cons
  • Model-specific cover designed to fits well in only 2 car brands.
  • Needs to be fully dismounted and then mounted during cargo haulage.
  • Racks cannot be installed on top of tri-fold cover.

Bottom-line

The Tonno-Pro 42-200 is a durable, well-designed, and easy-to-install soft tri-fold tonneau cover.

The three foldable panels feature strong aluminum-frames that can be opened using an easy-to-use latch system.

The construction quality is good too, with the premium-grade vinyl cover able to withstand extreme weather conditions. The tough nylon connectors also ensure that the panels folds compactly.

Strong, hard-wearing and water tight; exactly what a good tonneau cover should be.


3. Premium TCD371011 Tonneau Cover

Here we have another easy-to-install soft folding tonneau cover featuring three foldable panels.

Its vinyl cover is dual-coated by marine-grade tough aluminum powder, and can withstand extreme weather conditions.

The panels also feature high-grade aluminum frames that have upward-arched support bows which ensure that the fabric is held taut, and can quickly drain water.

This affordable tri-fold cover is designed to secure and protect cargo, as well as shield it from sunlight, rainfall, and prying eyes. This model is designed and manufactured by MaxMate.

The Premium TCD371011 is a well-designed lightweight product that weighs only 32 pounds, hence it does not add any significant weight to the pick-up truck.

The fully-assembled tonneau cover is 72inches long, 30inches wide, and its aluminum frame is 4inches thick.

Just like the Tonno-Pro 42-200 and the Tyger Auto TG-BC3C1007, the Premium TCD371011 is installed on top of the truck-bed rails and because this covers the stake pockets, the car-owner cannot install racks on top of this soft tri-fold cover.

The Premium TCD371011 is model-specific; and it is designed to fit into the following pick-up models: the 2002-2017 Dodge-Ram 1500 and 2003-2017 Dodge-Ram 2500, as well as the Dodge-Ram 3500 Fleetside.

It is well suited to fit to the standard 6.5-feet long truck bed of these models. Its powder-coated aluminum frame is secured to the truck-bed rail using impact-resistant clamps.

To install this tri-fold into the truck, one needs to remove the utility track and then install the side rails that will support the aluminum frame for the tri-fold.

The tri-fold cover of the Premium TCD371011 is fastened onto the truck bed using an easy-to-operate latch system that has been purposefully-designed to accommodate the upward-arched support bows.

The panels of the Premium TCD371011 can only be opened once the tailgate has been flung open.

The panels can then be folded on top of each other towards the cab, and if necessary entirely dismounted from the truck-bed so that the user has complete access to the truck-bed.

Just like the Tyger Auto TG-BC3C1007 and the Tonno-Pro 42-200, the Premium TCD371011 improves aerodynamics by minimizing drag and this consequently improves fuel mileage.

This vinyl-covered tri-fold also improves the aesthetics of the truck by giving it a glossy and sleek appearance. Its weather-tight seals protect the cargo from dust, dirt, and moisture.

Pros of the Premium TCD371011 Tonneau Cover
  • Fully-assembled tri-fold cover.
  • Made of durable aluminum frames.
  • Easy to operate latch system.
  • Low profile design.
  • Lightweight.
  • Supports hauling of tall cargoes.
  • Textured vinyl-covered finish.
The Cons
  • Model-specific cover designed to fits well in only 2 car brands.
  • Needs to be fully dismounted and then mounted during cargo haulage.
  • Racks cannot be installed on top of tri-fold cover.

Bottom-line

The Premium TCD371011 is a durable, tough, and easy-to-install soft folding tonneau cover that features three foldable panels and an easy-to-use latch system.

The entire unit covered by vinyl fabric that is dual-coated using marine-grade tough aluminum powder, hence ensuring that it can withstand extreme weather conditions.

If you own one of the trucks specific to this tonneau cover, this is the model for you. Highly recommended.


4. Lund-96893 Tonneau Cover

The Lund-96893 is a high-quality, low-maintenance, and versatile soft roll-up cover made from high-grade, flexible and rip-resistant fabric.

It features a rail system that is fitted underneath the fabric where it holds a series of aluminum support frames whose function is to ensure that the fabric can withstand massive snow weights without deforming, as well as ensure that the fabric is maintained in a taut position that allows rainwater to drain easily and quickly.

This affordable roll-up cover is designed to secure and protect cargo, as well as shield it from sunlight, rainfall, and prying eyes.

This model is designed and manufactured by Lund, a U.S-based maker of high-quality and durable tonneau covers.

The Lund-96893 is a well-designed lightweight product that weighs only 30 pounds, hence it does not add any significant weight to the pick-up truck.

The fully-assembled tonneau cover is 84inches long. It is installed on the truck-bed rails without covering the stake pockets, and the car-owner can therefore use these stake pockets to fit in a rack or a tie-down.

Unlike, the model covers above, the Lund 96893 is not car model-specific, and can fit into any compatible pick-up truck.

Likewise it can be installed without having to take out the utility track from the truck-bed.

Compared to a tri-fold, this roll-up cover is much easier to remove. Likewise, the roll-up cover can be opened fully, and the cover gently rolls and stores neatly behind the cab.

This provides almost complete access to the truck bed which allows cargo to be placed on the cargo-bed and the roll-up cover is then simply unrolled to cover the cargo.

Therefore, in contrast to the tri-fold, this roll-up cover stay on the truck-bed at all times.

The Lund-96893 is secured onto the truck bed using clamps. It is shipped as a package containing a fully-assembled bed cover, storage bag, mounting hardware kit, instruction manual, and a pair of side rails.

The bulkhead, or cover-head is placed just behind the cab at the front-most edge of the truck-bed, and then screwed onto the rails.

Thereafter, the impact-resistant clamps secure the side rails onto the truck-bed rail. Afterwards, the cover is rolled out till it reaches the tailgate region where it is latched down onto the truck-bed.

The high-grade fabric of this roll-on cover has a superb texture that cannot trap dirt or dust.

This also means that it can cleaned with water, without resorting to chemical cleaners.

Likewise, the weave fabric is resistant to moisture, mold growth, and ultraviolet light, hence it cannot fade easily. It also features a tension control mechanism that ensures that the fabric is as taut as needed.

This roll-on cover can be opened partially or fully. The ability to open it partially allows for tall cargo to be hauled uncovered, while short compact cargo can be hauled inside the covered compartment.

The Lund-96893 improves the aerodynamics of the truck by minimizing drag and this consequently improves fuel mileage.

The textured fabric also improves the aesthetics of the truck by giving it a glossy and sleek appearance. Its weather-tight seals protect the cargo from dust, dirt, and moisture.

The Lund-96893 also benefits from a limited lifetime warranty.

Pros of the Lund-96893 Tonneau Cover
  • Fully-assembled soft roll-on cover.
  • Made of durable high-grade, moisture-resistant and water-proof fabric.
  • Features strong aluminum support.
  • Tension control system prevents fabric from flapping during travel.
  • Low profile design.
  • Lightweight.
  • Easy to operate.
  • Racks and tie-downs can be fitted on the covered truck.
  • Supports hauling of tall cargoes.
  • Textured fabric finish.
  • Limited lifetime warranty.
  • Can fit any compatible pick-up truck.
The Cons
  • Not as durable as folding tonneau cover.
  • Cannot handle as much snow weight as folding tonneau cover.

Bottom-line

The Lund-96893 is our top pick universal tonneau cover.

This is a high-quality, low-maintenance, and versatile soft roll-up cover made from high-grade, flexible and rip-resistant fabric; and it can fit onto almost any pick up truck!

If you want a simple yet reliable tonneau solution, this is the one to go for.


5. TruXedo 271801 TruXport Tonneau Cover

This is a high-quality soft roll-up cover made from flexible and rip-resistant fabric.

Its rail system fits to the truck-bed rails and holds in place a series of support frames which ensure that the fabric can withstand massive snow weights without deforming, as well as drain rainwater easily and quickly.

Its superior fastening and water-sealing construction ensure that it fits snugly into compatible trucks, with its tension control system maintaining the fabric in a taut state.

This affordable roll-up cover is designed to secure and protect cargo, as well as shield it from sunlight, rainfall, and prying eyes. This model is designed and manufactured by Truxedo.

The TruXedo-271801 is an intuitively-designed lightweight product that weighs only 24 pounds, which makes it lighter than the Lund-96893.

The TruXedo-271801 comes as a fully-assembled tonneau cover that is 80inches long.

It is designed to be installed on the truck-bed rails without covering the stake pockets, and the car-owner can therefore use these stake pockets to fit in a rack or a tie-down.

Just like the Lund-96893, the TruXedo-271801 is not car model-specific, and can fit into any compatible pick-up truck.

Likewise it can be installed without having to take out the utility track from the truck-bed. Also, when compared to tri-fold covers, the TruXedo-271801 is much easier to open, and it stays on the truck-bed at all times. It is secured onto the truck bed using clamps.

Just like Lund-96893, the TruXedo-271801 is shipped as a package containing a fully-assembled bed cover, storage bag, mounting hardware kit, instruction manual, and a pair of side rails.

https://www.youtube.com/watch?v=04WpRnUUGiI

The bulkhead needs to be placed behind the cab at the front-most edge of the truck-bed, and then screwed onto the rails. Thereafter, the impact-resistant clamps secure the side rails onto the truck-bed rail.

Afterwards, the cover is rolled out till it reaches the tailgate region where it is latched down onto the truck-bed.

The high-grade fabric of the TruXedo-271801 has a superb texture that can neither trap dirt or dust. Therefore, it can cleaned with water, without resorting to chemical cleaning.

Likewise, the weave fabric is resistant to moisture, mold growth, and ultraviolet light, hence it cannot fade rapidly.

The TruXedo-271801 can be opened partially or fully. The ability to open it partially allows for tall cargo to be hauled while uncovered, while small compact cargo can be hauled inside the covered compartment.

The cover also improves the aerodynamics of the truck by minimizing drag and this consequently improves fuel mileage. The textured fabric also improves the aesthetics of the truck by giving it a glossy and sleek appearance. Its weather-tight seals protect the cargo from dust, dirt, and moisture.

The TruXedo-271801 benefits from a limited lifetime warranty.

Pros of the TruXedo-271801 Tonneau Cover
  • Fully-assembled soft roll-on cover.
  • Made of durable high-grade, moisture-resistant and water-proof fabric.
  • Tension control system prevents fabric from flapping during travel.
  • Low profile design.
  • Lightweight.
  • Easy to operate.
  • Racks and tie-downs can be fitted on the covered truck.
  • Supports hauling of tall cargoes.
  • Textured fabric finish.
  • Limited lifetime warranty.
  • Can fit any compatible pick-up truck.
The Cons
  • Not as durable as folding tonneau cover.
  • Cannot handle as much snow weight as folding tonneau cover.

Bottom-line

The TruXedo 271801 TruXport is a high-quality, low-maintenance, and versatile soft roll-up cover made from high-grade, flexible and rip-resistant fabric.

Its innovative design features a quick-latch system for easy installation, and a rail system featuring support frames and a tension control system which ensure that the fabric can remain taut and withstand massive snow weights.

If the Lund isn’t the choice for you, yet you are still after a simple to use roll-up tonneau cover, you may well want to check out this. Highly recommended.


Image Credits: Gulf South Customs